Product ID:TT-P-1511B,TY 1,WHITE,27880,SEMIGLOSS LATEX
MSDS Date:01/01/1987
FSC:8010
NIIN:01-091-0752
MSDS Number: BGLMF

REPUBLIC POWDERED METALS, INC.

Emergency Phone: 216-225-3192

Cage: 92414

REPUBLIC POWDERED METALS INC

724 MEDINA, OH 44256 US

Telephone: 330-225-3192; 800-255-1136

Cage: 92414

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: >15%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

CLAY (CAS# 22708-90-3) (TLV IS OF RESPIRABLE NUISANCE DUST

Fraction By Weight: > 3%

ACGIH TLV: 5 MG/CUM (MFR)

PROPYLENE GLYCOL (CAS# 57-55-6) (SEE SUPP DATA FOR OTHR

CAS: 57-55-6

RTECS: TY2000000

Fraction By Weight: > 1%

ACGIH TLV: NOT ESTAB (MFR)

Effects of Overexposure:EYE:MILD IRRIT.SKIN:POSS MILD IRRIT FOR
SENSITIVE PEOPLE.INHAL:VAP MAY CAUSE EYE + (SEE OTHR PRECAUT

First Aid:EYES:FLUSH W/COPIOUS AMTS OF H*2O FOR @ LEAST 15 MIN.
SKIN:WASH W/SOAP & H*2O. INHAL:MOVE PERSON TO FRESH ROOM
TEMPERATURE AIR. INGEST:INDUCE VOMITING,GIVE WATER, & CALL
PHYSICIAN.

Flash Point:NONE ,TCC
Extinguishing Media:N/A (MFR)
Fire Fighting Procedures:NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIP .
Unusual Fire/Explosion Hazard:MAY SPATTER WHEN TEMPERATURE EXCEEDS
BOILING POINT.FIRE CONDITIONS MAY YIELD OXIDES OF CARBON.

Spill Release Procedures:DIKE & ABSORB SPILL WITH INERT MATERIAL
(SAND,ETC.) & DISPOSE SUITABLY.

Handling and Storage Precautions:AFTER USING PRODUCT,WASH HANDS W/SOAP
& H*20.KEEP PROD FROM FREEZING DURING SHIPPING,HANDLING;FREEZING
PRESENTS NO HAZ BUT MAY RUIN THE PRODUCT.
Other Precautions:OVEREXP EFTS:NOSE IRRT.INGEST:LGE AMTS COULD GIVE
TOXIC EFFECTS. MIL SPEC IS CLASS A. RPM PRODUCT NO. 1491. DATE OF
PREP:11-26-85.

Respiratory Protection:NONE REQUIRED UNDER NORMAL CONDTN IF ADEQUATE
VENT IS USED (MFR).
Ventilation:GENERAL VENTILATION (MFR).
Protective Gloves:IMPERVIOUS
Eye Protection:CHEMICAL WORKERS GOGGLES
Other Protective Equipment:APRON,WORK CLOTHES,ETC.
Supplemental Safety and Health
PROD CONTAINS TRACE AMTS OF PHENYL MERCURIC ACETATE BIOCIDE,AQUEOUS
AMMONIA + RESIDUAL ACRYLIC MONOMERS.THESE TRACE AMTS SHOULD PRODUCE
NO HARMFUL EFTS IF HANDLED W/NORMAL CARE + CAUTION (MFR)

HCC:N1
Boiling Pt:B.P. Text:212F (100C)
Vapor Pres:17
Vapor Density:< 1
Spec Gravity:1.458
Evaporation Rate & Reference:SLOWER THAN BU AC
Percent Volatiles by Volume:59.2

Stability Indicator/Materials to Avoid:YES
NONE KNOWN (MFR)
Hazardous Decomposition Products:FIRE CONDITIONS MAY YIELD OXIDES OF
CARBON.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL,STATE &
LOCAL REGULATIONS;REFER TO HAZARD CAUTION INFORMATION ELSEWHERE ON
THIS SHEET.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.